Resistance Ranger Dual-Wire Constant Monitors from Transforming Technologies
The Resistance Ranger Constant Monitors Series are a cost effective and accurate system to ensure that an ESD workstation station is grounded. The system continually monitors the resistance levels of the grounding products and alarms if they fail. The system uses superior dual wire wrist straps that provide two paths-to-ground to ensure ESD protection. The Rangers can also monitor the resistance levels of ESD worksurfaces and grounded tools and alarm if there is an issue. All three models use an ultra-low voltage sensing current and are designed for use in the most sensitive environments and processes.
- CM1601 - RangerOne: This model is simplest and most cost effective constant monitor. It monitors the resistance of 1 person/wrist strap. Also provides a second unmonitored ground jack.
- CM1602 - RangerTwo: This model monitors the resistance level of 1 person/wrist strap and the worksurface. Also provides a second unmonitored ground jack.
- CM1600 - RangerPro: RangerPro is the premiere work station grounding system available. A continuous pulse of an ultra-low voltage signal measures the electrical resistance of two wrist bands, two work surfaces, and two auxiliary grounds simultaneously. Also provides a two additional unmonitored ground jacks .The RangerPro has an output to hookup to an external alarm. The monitor is enclosed in a stainless steel conductive case.
Never Needs Calibration
The Ranger Series is factory calibrated and does not require annual recalibration. It is recommended to verify the monitors are in proper working order with the CM2015PV periodic verification unit.
