Transforming Technologies CM2815 - Network Ready Dual Conductor Resistance Monitor

The Transforming Technologies CM2815 Network Ready Dual Conductor Resistance Monitor continuously checks two operators and work surfaces ground connections. When the user is wearing a wrist strap, the monitor observes the resistance of the loop, consisting of a wire, a person, a wrist-band and a second wire. If any part of the loop should open (become disconnected or have out of limit resistance) the circuit will go into the alarm state. An important feature of the dual wire CM2815 monitor is that even if one conductor is severed the other operator has reliable path to ground with the other wire. It comes packaged in a stainless steel case with remote jacks. This monitor is an extremely sensitive and reliable ground monitoring instrument that has audible and visible alarms that are triggered if the operator's resistance exceeds 35 meg ohm (factory default). The low resistance can also trigger an alarm event and the mat alarm limits are set at 100 meg ohm. This unit meets or exceeds requirements of ANSI ESD-S20.20 and ESDA standards 1.1-2006.

Benefits & Features of the Transforming Technologies CM2815 Network Ready Dual Conductor Resistance Monitor:

• Continuously checks two operators and work surfaces ground connections
• When used with wrist strap monitor observes the resistance of loop
• If one conductor is severed the other operator has reliable path to ground with the other wire
• Packaged in a stainless steel case with remote jacks
• Monitor is extremely sensitive and reliable ground monitoring instrument that has audible and visible alarms
• Meets or exceeds requirements of ANSI ESD-S20.20 and ESDA standards 1.1-2006

Network-Ready Dual Conductor Resistance