ACL Staticide 6233072 - SpecMat-H Series Homogeneous Pre-Cut Mat - 30" x 72" x 0.10" - Light Blue

The ACL Staticide 6233072 SpecMat-H Series Homogeneous Pre-Cut Mat is a single layer ESD safe thermoplastic vinyl material that is made for bench tops. The extruded manufacturing process utilizes plasticizers and lower-outgassing solvents, unlike many ESD vinyl's made by cast coating. The proprietary polymers used to manufacture this matting are homogeneously dispersed with a migratory anti-static formula that allows for both surface and volume resistance. By design the anti-static properties cannot be worn away through wear or out gassing. The ACL Staticide 6233072 SpecMat-H Series Homogeneous Pre-Cut Mat is resistant to solder, heat, and most solvents making it perfect for static-sensitive production areas in electronics manufacturing and laboratories. This table mat can be customed cut with a sharp blade to fit trays or other areas. The SpecMat-H material delivers a typical resistance-to-ground measurement of 108-109 ohms per ANSI/ESD S4.1 and complies with industry standards including EN 61340-5-1: Protection of Electronic Devices from Electrostatic Phemomena and ANSI ESD S20.20: Protection of Electrical and Electronic Parts, Assemblies and Equipment.

Please note: This matting comes with a free 2 oz. sample of the ACL Staticide 6001 Staticide® Mat & Table Top Cleaner and two 10 mm female ground snaps.

Benefits & Features of the ACL Staticide 6233072 SpecMat-H Series Homogeneous Pre-Cut Mat:

• Provided with 2 oz. sample of ACL Staticide 6001 Staticide® Mat & Table Top Cleaner and two female ground snaps
• Single layer ESD safe thermoplastic vinyl
• Extruded manufacturing process utilizes plasticizers and lower out gassing solvents
• Uses proprietary polymers that are homogeneously dispersed with migratory anti-static formula
• Anti-static properties cannot be worn away through wear or out gassing
• Resistant to solder, heat, and most solvents

SpecMat-H Series Homogeneous Pre-Cut Mat - 30" x 72" - Light Blue