StatGuard Flooring 46057 Statguard Conductive Epoxy Coating Light Gray - 4 Gal Kit

The Statguard Conductive Epoxy Coating provides a flooring surface that does not generate a static charge and will act as part of the path-to-ground for an operator wearing ESD footwear.

Benefits & Features of the StatGuard Flooring 46057 Statguard Conductive Epoxy Coating Light Gray - 4 Gal Kit:

• Conductive Epoxide Polymer Floor Coating Provides a flooring surface that does not generate a static charge and will act as part of the path-to-ground for an operator wearing ESD footwear.
• Conductive (Rtt and Rtg 1 x 10⁴ to < 1 x 10⁶ ohms per ANSI/ESD STM7.1 or IEC 61340-4-1)The surface resistance range will remain low enough to act as a path-to-ground with normal dirt and grime build-up on a floor and meet the required limits of ANSI/ESD S20.20 (< 1 x 10⁹ ohms) for a footwear / flooring system.
• One Coat, 2-part, Water-Based Epoxy System Mix 4 gallon pre-measured part A and B together and install with squeegee and nap roller.
• 50% Solids by Volume Reduces dry time. Estimated Coverage Per Gallon = 200 sq ft. at 8 mil (0.008" thick).
• Statguard® Conductive Epoxy should not be allowed to freeze. If the epoxy part A or part B freezes surround the closed container with hot water to thaw completely and melt the crystals back into liquid. Make sure epoxy is then brought up to room temperature 70°F (20°C) before mixing and using.
• Made in the United States of America

---

---

Statguard Conductive Epoxy Coating Light Gray - 4 Gal Kit