Alpha 373-5G - Liquid Soldering Neutral Flux - 5 Gallons

Please Note: This item is considered Hazardous and a Hazardous Material fee must be added to the order if shipping prepaid service. This item can ONLY ship ground service.

The Alpha 373-5G Liquid Soldering Neutral Flux is used in mass soldering of printed circuit boards. It has a special formulation that provides broad preheat range, low smoke, low odor and does not foam in cleaning systems using soft or deionized water. This neutral flux is primarily for foam applications and conveyor soldering and can be sprayed, dipped, wave or brushed applied. The Alpha 373-5G Liquid Soldering Neutral Flux organic activating systems have a neutral pH at room temperature and become active with elevated temperatures.

Please note that flux applicators and reservoir should be plastic or titanium and flux coated surfaces should be preheated to provide optimum wicking and solder joint formation. Also to note is the degree of preheat is dependent on many variables such as conveyor speed, type of components, and substrates. When entering the solder wave with topside temperature in the 177°F range is typical.

Benefits & Features of the Alpha 373-5G Liquid Soldering Neutral Flux:

• Used in the mass soldering of printed circuit boards
• Organic activating systems have a neutral pH at room temperature and become activated with elevated temperatures
• Formulation provides broad preheat range, low smoke, low odor and does not foam in cleaning systems using soft or deionized water
• Primarily for foam application and conveyor soldering
• Can be spray, dip, wave or brush applied
• Flux applicators and reservoir should be plastic or titanium
• Flux coated surfaces should be preheated to provide optimum wicking and solder joint formation
• Degree of preheat is dependent on many variables such as conveyor speed, type of components and substrates
• Entering the solder wave with topside temperature in the 177°F range is typical

Alpha Neutral Flux - 5-Gallon Pail