Brady 150740 - 7-Day Inspection Timer - 10/Pack

The Brady 150740 7-Day Inspection Timer provides a new way to conduct inspections easily and fast with a visual reminder for easy indication of inspection. It provides this visual reminder with a blinking LED light that changes color to indicate the status of inspection and helps increase safety and efficiency. This blinking LED light is approximately two minutes in length in the green section of the timer and shortens with the yellow and red LEDs. The Brady 150740 7-Day Inspection Timer enhances visibility to ensure that you maintain compliance with the inspection regulations and helps avoid missed inspections, which can lead to costly fines or dangerous situations. These highly visible timers can withstand harsh conditions and have great durability in water, dust and extreme temperatures.

Benefits & Features of the Brady 150740 7-Day Inspection Timer:

• Available in 7-Day, 30-Day, 90-Day, 180-Day and 365-Day to meet required inspections set by OSHA and ANSI (see below for inspection guidelines)
• Powered by (3) AAA batteries. Approximate battery life is 1 year
• Visual reminder to increase safety and efficiency
• Blinking LED lights that change color to indicate status of inspection
• Enhances visibility to maintain compliance with inspection guidelines in conjunction with safety and awareness
• Helps prevents missed inspections
• (IP65 rated) Can withstand harsh conditions, great in water dust and extreme temperatures
• Easily attachable to Brady Ladder Tags

Required Inspections that Brady Pre-Set Timers will fit

• Cranes & Derricks in Construction - OSHA
• 1926.1412(e)(1) Each month the equipment is in service it must be inspected in accordance with paragraph (d) of this section (each shift).
• 1926.1412(f)(1) At least every 12 months the equipment must be inspected by a qualified person in accordance with paragraph (d) of this section (each shift) except that the corrective action set forth in paragraphs (f)(4), (f)(5), and (f)(6) of this section must apply in place of the corrective action required by paragraphs (d)(2) and (d)(3) of this section.
• Fall Protection Equipment – ANSI
• ANSI/ASSE Z539.2-2007 Fall protection and fall rescue equipment shall be inspection on a regular basis not to exceed one year.
• Portable Fire Extinguishers – OSHA
• 1910.157(e)(2) Portable extinguishers or hose used in lieu thereof under paragraph (d)(3) of this section shall be visually inspected monthly.
• Automatic Sprinkler System - OSHA
• 1910.159(c)(2)Maintenance. The employer shall properly maintain an automatic sprinkler system installed to comply with this section. The employer shall assure that a main drain flow test is performed on each system annually. The inspector's test valve shall be opened at least every two years to assure that the sprinkler system operates properly.
• Lockout/Tagout - OSHA
• 1910.147(c)(6)(i)) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.

7-Day Inspection Timer - 10/Pack